Article: How to find their ring size without them knowing
How to find their ring size without them knowing
The short answer: borrow a ring they already wear on their ring finger and measure the inside diameter in millimetres. That one number tells a jeweller the size. If you cannot get hold of a ring, ask someone close to them, or choose a size slightly large and have it adjusted after the proposal. Most engagement rings can be resized.
You do not need to get it perfect. You need to get it close.
Six ways to find a ring size in secret
| Method | How reliable | Risk of being caught |
|---|---|---|
| Take one of their rings to a jeweller | Very good | Medium. They may notice it is gone |
| Measure the inside of one of their rings | Good | Low |
| Press the ring into a bar of soap | Good | Low |
| Slide the ring onto your own finger and mark where it stops | Fair | Low |
| Ask a close friend, sister or parent | Fair to good | Depends on the friend |
| Guess from height and build | Poor | None |
1. Take one of their rings to a jeweller
The most accurate way. A jeweller drops the ring onto a sizing stick and reads the size in seconds. Pick a ring they will not miss for an hour.
2. Measure the inside of a ring
Lay the ring flat on a ruler and measure straight across the inside, edge to edge, at the widest point. Do not include the metal. Write it down in millimetres to one decimal place if you can. A photo of the ring on the ruler, taken from directly above, works too.
3. Press it into soap
Push the ring into a soft bar of soap to leave a clean circle. Wipe the ring and put it back. A jeweller can measure the impression.
4. Use your own finger
Slide their ring onto one of your fingers and mark with a pen where it stops. A jeweller can measure that point on your finger.
5. Ask someone close to them
A sister, parent or best friend may already know, or can find out by trying on rings together. Choose someone who can keep a secret.
6. Guess
The last resort. In the UK the most common sizes for women are L and M, and most fall between J and P. For men, R to T is common. Slim hands sit towards the lower end.
Which ring should you borrow?
This matters more than the method. Check three things.
- Which finger they wear it on. An engagement ring goes on the ring finger of the left hand. A ring worn on the middle finger or thumb will be too big.
- Which hand. Fingers on the hand you write with are often about half a size larger. If the ring is from their right hand and they are right handed, tell the jeweller.
- How wide the band is. A wide band fits tighter than a thin one, so a wide ring will read slightly large.
Jeweller's tip: avoid measuring a finger with string. String stretches and the knot adds length. It is the least accurate method people use.
What if you are between sizes or not sure?
Go slightly bigger. A ring that is a little loose still goes on the finger when you propose. A ring that is too small does not get past the knuckle, and that is not the moment you want.
Fingers also change through the day. They are smaller when cold and first thing in the morning, and larger when warm and in the evening. Half a size either way is normal.
Can an engagement ring be resized?
Usually, yes. A plain gold or platinum band can normally go up or down by one or two sizes without any trouble.
Some rings are harder.
- Diamonds all the way round the band. A full eternity style has no plain metal to cut, so it often cannot be resized at all.
- Diamonds part way round. These can be resized a little. A large change can loosen the stones.
- Tension settings. The band holds the stone by pressure, so changing the size is specialist work.
If you are unsure of the size, choose a design with plain metal at the back of the band. Ask what resizing costs before you buy.
Two ways to avoid the problem altogether
- Propose with the diamond. Choose the stone, propose with it in a simple holding ring or a box, and design the finished ring together afterwards.
- Have the ring sized after the proposal. Order it in a common size, propose, then have it adjusted to fit properly.
Either way they get a ring that fits and you keep the surprise.
Common questions
What is the average ring size for a woman in the UK?
L or M. Most women's ring sizes fall between J and P.
How do UK ring sizes work?
UK sizes use letters from A to Z, with half sizes in between. Each letter is a slightly larger inside diameter. Size L is about 16.5mm across the inside and size M is about 16.9mm. US sizes use numbers instead, so tell your jeweller which system a size is in.
Should an engagement ring be tight or loose?
It should slide over the knuckle with a little resistance and sit on the finger without spinning freely. If it falls off when you shake your hand, it is too big.
Is it better to size up or down if I am unsure?
Up. A ring that is slightly loose can still be worn for the proposal and made smaller later. A ring that is too small will not go on.
How long does resizing take?
It depends on the ring and the jeweller. A plain band is a quick job. Ask for a timescale before you order.
We can help with the size
Bring in a ring they wear, a measurement or a photo of the ring on a ruler, and we will tell you the size. If you are choosing a setting in the ring studio, ask us about resizing before you order.
Before you choose the setting, read will a wedding ring sit flush with your engagement ring. For the stone, start with the 4Cs of diamonds and how much to spend.
Call +44 7898 659493 or visit us at 81 to 83 Spencer Street in Birmingham's Jewellery Quarter, Monday to Saturday, 9am to 6pm.








